Installing a Brick Paver Walkway or Single Bricks

The usage of Bricks or Pavers to create a pathway or patio area matches a home in a way that is unrivaled. In addition, setting up a Brick or Paver sidewalk does not always require a pro.

The key to installing a Brick or Paver Walkway is to very first correctly prepare the area where the bricks/pavers are to be installed. In addition, string lines should be strung on each side of the pathway.
When the area has actually been dug down, 3/4" gravel stone ought to be laid in and tamped down firmly. The height between the tamped down sand and the stringline must equate to the density of the brick or paver.

Now that you have a steady base, place a 1" pipe or ledger board the length of the pathway on either side of the pathway. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will produce a level surface area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared area. These strips will act as your sidewalk border and help to maintain the integrity and shape of the pathway.

The key to laying the bricks/pavers is to guarantee that they interlock with each other. Constantly stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again assist maintain the stability of the pathway.

Undoubtedly click here bricks/pavers will need to be cut or split when building the sidewalk. To really cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the area where you want to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.

After installing the bricks, develop the outdoors edges with additional sand, and then shovel in the topsoil and pack down strongly.
Spread stone dust over the new sidewalk and sweep into the fractures. This will complete the interlocking of the bricks and assist to get rid of any weed development.


In addition, installing a Brick or Paver walkway does not always require a pro. The secret to installing a Brick or Paver Walkway is to very first appropriately prepare the area where the bricks/pavers are to be set up. Now that you have a stable base, place a 1" pipe or journal board the length of the walkway on either side of the walkway. These strips will act as your pathway border and aid to preserve the integrity and shape of the pathway. Inevitably bricks/pavers will need to be cut or divided when constructing the pathway.

Leave a Reply

Your email address will not be published. Required fields are marked *